Version 1.0.0 Current
First release.
- Reactions, shear, bending moment and deflection of a single beam, recalculated live as the inputs change.
- Loads: any number of point loads, applied moments, and distributed loads that vary linearly between a start and an end intensity. Each load can be hidden in the diagram without leaving the analysis. Locations accept a percent of the span, such as 25%, 50%.
- Supports: any number of pin, roller and fixed supports at any location. Two simple supports, or one fixed support, are solved by equilibrium. Every other arrangement is solved as a statically indeterminate beam by the direct stiffness method, with a uniform prismatic section. A support arrangement that leaves the beam free to move is reported as an error.
- Deflection in real units when both E and I are entered. With both left blank, a relative deflected shape is shown and labelled as such.
- A free body diagram that updates as you type, with the reaction forces and reaction moments added once the beam is solved. Inputs that stop the diagram from drawing are outlined in red.
- Shear, moment and deflection diagrams, with hover readouts at an even grid of stations, every zero crossing and the governing point. Tooltip density is a setting.
- Results panel with the reactions, the governing shear, moment and deflection with their locations, and an equilibrium check.
- Results table at every 10% of the span, plus the exact governing location of each column, with its own units and a CSV download.
- A summary or a detailed report, and its PDF. The detailed report shows every calculation step: determinacy, load resultants, the reactions by equilibrium or by the stiffness method, shear and moment at every station, and deflection, each with its numbers filled in and checked against the solver.
- Metric and imperial units, with a per category choice for length, force, distributed load, moment, E and I. Changing units converts every entered value, and any mix of units is solved correctly.
- Maximum decimal places for displayed results, as a setting.
- Undo and redo.
- Save and load models as .json files.