ACI 318-25 Section 21.2.2.3 caps φ between 0.1f'c Ag and the balanced load. What changed from ACI 318-19, a worked 14 x 16 in column where design moment drops 8.7%, and which columns are affected.
A column under axial load and moments about both axes bends about a skewed axis. What the P-M interaction curve at an angle θ is, how it is calculated under ACI 318-19, and why checking Z and Y separately is not enough.
A P-M interaction diagram shows every combination of axial load and moment a concrete column can carry. How it is built under ACI 318-19, its seven key points, and how to check a column with it.
A 12 x 12 in square and a 13.54 in round tied column have the same 144 in² of concrete and the same 8-#8 bars, yet the square carries about 12% more design moment. The ACI 318-19 P-M curves, and where the difference really comes from.
A finite element model of a C12X20.7 gives Cw = 87 in⁶ and e₀ = 0.690 in, while the AISC Manual lists 112 in⁶ and 0.870 in. Both are right: AISC uses thin-walled formulas, and the real sloped flanges warp less. Which value to use, and when.
What the elastic section modulus S and the plastic section modulus Z mean, how to calculate both for a rectangle and a T section, the shape factor Z/S of common sections, and where each one is used in AISC 360.
A cold-formed 4CS2.5x105 channel uses 14% less steel than a hot-rolled C3X4.1, yet has 60% more Ix and 4.7 times the Iy. Why thin walls make a stiffer section, and the catch: local buckling and torsion.